Waters Prep HPLC 2535

Includes:

• Waters Prep HPLC 2535 Quaternary Gradient Module
• Cables and connectors
• Warranty Coverage

Options:

• Refurbishment Available with Extended Warranty
• Installation & Familiarization

This Waters Prep HPLC 2535 Quaternary Gradient Module comes fully tested working by Conquer Scientific. PN: 186004557

The Waters Prep 2535 Quaternary Gradient Module is a four solvent, low pressure mixing gradient pump (up to 50 mL/min) that serves as a solvent delivery device for purification systems. Dual programmable flow paths enable the system volume to change when the column size is changed.

Features:

• Four-solvent gradient selection
• Two fluidic pathways (small scale and large scale) to accommodate column selection and chromatographic efficiency
• Interfaces to a variety of detectors and peak fraction collectors for optimum purifications
• Allows UV- or MS- directed purification with MassLynx Software
• Leak detection is standard
• 50 mL/min capability for using columns up to 30 mm I.D. for purification of milligrams of material
• Many optional shelf units, degassers, splitters, and accessories to customize any system
• High pressure operation @ 6,000 psi (414 bar) to accommodate a wide variety of column lengths, diameters, and particle sizes

Specifications:

•  Electrical data;  6.5 A, 50/60 Hz,
• Power consumption: 650 W
• Fuse: 10A, 5 x 20 mm, slow-blowing, IEC type
• Line Voltage: 100 to 240 Vac +/- 10%
• Operating temperature: 4 – 40 °C (39.2 – 104.0 °F)
• Operating humidity: 10 -90%, non- condensing
• Dimensions (W x H x D): 28.0 x 43.2 66.0 cm (11.0 x 17.0 26.0 in.)
• Weight: 39.5 kg (87.0 lbs)