Agilent 1260

Item#: 28725
Tag: HPLC Multisampler

Description

Product Description G7167A

The Agilent 2160 Infinity II Multisampler can handle both vials and microtiter plates with ease and efficiency up to 800 bar system pressure, optimized on high flexibility. This compact module can house up to 6144 samples, all inside the Agilent stack footprint and the robotics to inject each into the chromatography in turn. With the multi-wash capability, you can reduce carryover to less than 9 parts per million. 

Specifications:

Physical Specifications;

• Weight:  22 kg (48.5 lbs)
• Dimensions (height × width × depth): 320 x 396 x 468 mm (12.6 x 15.6 x 18.4 inches)
• Line voltage: 100 – 240 V~, ± 10 %
• Line frequency: 50 or 60 Hz, ± 5 %
• Power consumption: 180 VA, 180 W
• Ambient operating temperature: 4 – 40 °C (39 – 104 °F)
• Ambient non-operating temperature: -40 – 70 °C (-40 – 158 °F)
• Humidity:  95 % r.h. at 40 °C (104 °F)1
• Operating altitude:  Up to 3000 m (9842 ft)

Performance Specifications;

• Injection range for Single-needle instruments: 

• • • Default: 0.1 – 100 µL in 0.1 µL increments optional: 20 µL or 40 µL (using optional 40 µL analytical head)
    • 0.1 – 500 µL or 900 µL in 0.1 µL increments (using 900 µL analytical head)
    • 0.1 – 120 µL in 0.1 µL increments with 1290 Infinity II large volume injection kit (hardware modification required) G4216-68711 0.1 – 500 µL or 1500 µL in 0.1 µL increments with 100 µL upgrade kit (hardware modification required) G7167-68711

• Injection range for Dual-needle instruments: 

• • • Default: 0.1 – 100 µL in 0.1 µL increments; optional: 20 µL or 40 µL (using 100 µL analytical head)
    • Up to 900 µL in 0.1 µL increments depending on installed loop size

• Injection precision for single-needle instruments: <0.15 % RSD or SD <10 nL, whatever is greater
• Injection linearity: 0.9999 in the range of 0.1 – 100 µL
• Pressure range: Up to 800 bar
• Sample viscosity range: 0.2 – 5.0 cP
• Sample capacity: 

• • • 1H Drawer up to 8 drawers and 16 positions, Shallow well plates (MTP)
    • 2H Drawer up to 4 drawers and 8 positions, MTP, deep well plates, vials, Eppendorf
    • 3H Drawer up to 2 drawers and 4 positions MTP, deep well plates, vials up to 6 mL, Eppendorf

• Injection cycle time: 

• • • <10 s using following standard conditions:
    • Default draw speed: 100 µL/min
    • Default eject speed: 400 µL/min
    • Injection volume: 1 µL

• Carryover:  <0.003 % (30 ppm) Multisampler Standard and Dual Needle, <0.0009 % (9 ppm) Multisampler Multiwash
• Multiwash: Outer needle wash and seat backflush for carryover reduction with up to 3 different solvents
• Communication: Controller Area Network (CAN), Local Area Network (LAN), ERI: ready, start, stop and shut-down signals