Mixed Domain Oscilloscope 200MHz 2.5GS/s, 4-Channel.
Unit sold with a valid calibration certificate and with 36 months warranty.
The Tektronix MDO3024 is a Mixed-Domain-Oscilloscope of the MDO3000-series.
It is a high integrated 6-in-1-Oscilloscope and contains an integrated spectrum analyzer, arbitrary function generator, logic analyzer, protocol analyzer as well as digitalvoltmeter/counter (some optional).
The MDO3000 is fully upgradable and customizeable.
Features:
TekVPI probe interface directly supports active, differential, and current probes for automatic scaling and units
9 in. WVGA wide screen color display
Small footprint and lightweight – only 5.8 in. deep and 9.2 lb.
FastAcq high-speed waveform capture rate finds elusive signal anomalies quickly
Wave Inspector Controls provide easy navigation and automated search of waveform data
33 automated measurements and waveform histograms for simplified waveform analysis
Oscilloscope:
Number of analog channels: 4
Bandwidth: 200 MHz, upgradable up to 1 GHz
Sample rate: 2,5 GS/s
Record length on all channels: 10 M
Max.waveform capture rate: >280,000 wfm/s
Standard passive voltage probes with 3.9 pF capacitive loading and 1 GHz, 500 MHz, or 250 MHz analog bandwidth
Spectrum analyzer:
Frequency range: 9 kHz - 200 MHz, optional: 9 kHz - 3 GHz
Arbitrary function generator (optional):
13 predefined waveform types
50 MHz waveform generation
128 k arbitrary generator record length
250 MS/s arbitrary generator sample rate
Logic analyzer (optional):
16 digital channels
10 M deep memory on all channels
121,2 ps time resolution
Protocol analyzer (optional):
Serial bus support for I2C, SPI, RS-232/422/485/UART, USB 2.0,CAN, LIN, FlexRay, MIL-STD-1553, and audio standards
Digital voltmeter:
4-digit AC RMS, DC, and AC+DC RMS voltage measurements
5-digit frequency measurements
Spectral analysis:
Dedicated front-panel controls for commonly performed tasks
Automated peak markers identify frequency and amplitude of spectrum peaks
Manual markers enable non-peak measurements
Trace types include: Normal, Average, Max Hold, and Min Hold
Spectrogram display enables easy observation and insight into slowly changing RF phenomena
Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
Arbitrary function generation:
Generate predefined signals to quickly simulate missing devices in designs
Capture signals on analog or digital inputs, transfer to the arbitrary edit memory, and replicate out from the AFG
Add noise to any signal to easily perform margin testing
Mixed signal design and analysis:
Automated triggering, decode, and search on parallel buses
Multichannel setup and hold triggering
MagniVu high-speed acquisition provides 121.2 ps fine timing resolution on digital channels
Protocol analysis:
Trigger, decode and automatically search on packet-level content on most common embedded design serial bus standards
Export protocol decode tables for use in documenting results
Digital voltmeter and frequency counter:
Quickly validate voltage or frequency measurements at a glance
Graphical readout provides information on stability of the measurement
Fully upgradable:
Add functionality, increase bandwidth or spectrum analyzer frequency range
Optional application support:
Power analysis
Limit and mask testing
€ 5,995 (net) $7,194 (US)