Used Agilent for sale by NSCA Technologies LLC | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Bridges Miscellaneous Bridges Keysight formerly Agilent T&M 86205A

Keysight formerly Agilent T&M 86205A

Send Request
  • Ask for price

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Keysight formerly Agilent T&M 86205A

Categories: Bridges, Miscellaneous Bridges

Manufacturer: Keysight Technologies (Agilent HP)

Model: 86205A

Condition: Used

Keysight (formerly Agilent T&M) 86205A RF Bridge

Description

Description

The Keysight 86205A high directivity 50 ohm RF bridge offers unparalleled performance in a variety of general-purpose applications. It is ideal for accurate reflection measurements and signal leveling applications.

Key Features

Superior RF performance

  • Coupling factor: 16 dB + 0.15 dB/GHz (< 3 GHz); 16.5 dB – 0.20 dB/GHz (> 6 GHz)
  • Directivity: 30 dB to 0.3 MHz, 40 dB to 2 GHz, 30 dB to 3 GHz, 20 dB to 5 GHz, 16 dB to 6 GHz
  • Return loss: 23 dB to 2 GHz, 20 dB to 3 GHz, 18 dB to 5 GHz, 16 dB to 6 GHz
  • Insertion loss: 1.5 dB + 0.1 dB/GHz

Product specifications of Keysight formerly Agilent T&M 86205A (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Status --

The 86205A/B and 86207A high directivity RF bridges offer unparalleled performance in a variety of general purpose applications. They are ideal for accurate reflection measurements and signal-leveling applications. They combine the directivity and broad-band frequency range of directional bridges and the low insertion loss and flat coupling factor of directional couplers.

  • 40 dB directivity: Excellent directivity allows you to measure high return loss devices and good port match lets you measure low returnl oss devices. This is especially important when making reflection measurements with scalar network analyzers, vector network analyzers and spectrum analyzers
  • Wide frequency range: The bridges have an exceptionally wide RF frequency range: 300 kHz to 3/6 GHz for the 50 Ω 86205A/B and 300 kHz to 3 GHz for the 75 Ω 86207A. They are ideal accessories when used with the E5061/71 family of the ENA series network analyzers
  • Low insertion loss: These bridges offer low insertion loss, (nominally 1.5 dB), which is significantly less than the typical 6 to 8 dB normally associated with RF bridges. Low insertion loss means more power to the device under test. This is required for the measurement of high-power solid state amplifiers and traveling wave tube amplifiers
  • Flat coupling factor: The frequency response of the coupled arm for these bridges is very flat, within ±0.2 dB of the nominal value of 16 dB. This is important in applications such as external power leveling where a power meter or diode detector is used to remotely level the output power from an RF source and when measuring power level dependent devices such as the LO input to a mixer or the RF input to an amplifier during compression testing

View Similar Listings
Hide Similar Listings

Listings similiar to Keysight formerly Agilent T&M 86205A

About NSCA Technologies LLC

Logo of NSCA Technologies LLC
Send to a Friend

Recently Viewed Products