Categories: Analyzers, Impedance Analyzers
Manufacturer: Keysight Technologies (Agilent HP)
Model: 4291B
Condition: Used
Seller: Telnet
HP AGILENT 4291B RF IMPEDANCE/MATERIAL ANALYZER
The HP 4291B RF impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The HP 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range. Basic impedance accuracy is ?? 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT. The HP 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias-dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models. The HP 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). Specifications. Measurement Impedance Parameters: |Z|, |Y|, theta, R, X, G, B, Cp, Cs, Lp, Ls, Rp, Rs, D, Q. Measurement Operating Frequency: 1 MHz to 1.8 GHz. Frequency Resolution: 1 mHz. Frequency Reference.
Options: 001 , 1D5 Fitted
4291B
The Agilent 4291B RF impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.
The Agilent 4291B also provides automatic level control and monitor of test signals by using IBASIC programming; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis function automatically calculates the circuit constant values of five circuit models.
The Agilent 4291B has two measurement channels; each channel can be set to measure a single (for example, Z) or dual (for example, Z-theta) impedance parameter. The color TFT with split display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Agilent 4291B. You do not need a separate instrument controller.
The Agilent 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. It provides a total dielectric/magnetic material measurement solution for the frequency range, 1 MHz to 1 GHz.
Seller Test Equipment Experts
Seller Test Equipment Connection Corp.
Seller Valuetronics International Inc
Seller Liberty Test Equipment, Inc.
Seller Instrumex GmbH
Seller Testwall Ltd
Seller Alltest
Seller Hitech&Facility
Used-Line Dealer since : 2004
Company info
We are specialized in
Our Services
Our Sales Policy
Disributor of
Use this form to contact a dealer from the Dealer Directory. You may contact up to 10 Dealers per day. Please note: Contact forms are monitored for spam. Users who send spam will be blocked from Used-Line.
To:
Remember me
*Contact name, email and message are required.
Product Specs
(From Used-Line T&M Specifications)
HP AGILENT 4291B
Description: