Used ANRITSU MT8820A for sale by Hitech&Facility | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Analyzers Communication Analyzers Anritsu MT8820A For Sale ANRITSU MT8820A

ANRITSU MT8820A

Send Request
ANRITSU MT8820A
  • $3,300

    IN STOCK
 Add to request cart
Send to a Friend
Flag of JapanEquipment Location: Japan      
View Description>
Hide Description

Description of ANRITSU MT8820A

Categories: Analyzers, Communication Analyzers

Manufacturer: Anritsu

Model: MT8820A

Condition: Used

Seller: Hitech&Facility

ANRITSU MT8820A/01/02

Radio Communication Analyzer
In stock
W-CDMA,GSM/GPRS,PDC test for Mobile Phone Generator:30-2700MHz -140--10dBm res1Hz stability2*10E-8/day Reciver:RF-Power Modulation-Analyzer AJP,BER,CallProcessing,OBW
Option(Hardware) 01:W-CDMA 02:TDMA Software:MX882000B:W-CDMA MX882001A:GSM MX882004A:PDC MX882051A:W-CDMA callProcessing Calibrated July,2007

Product specifications of ANRITSU MT8820A (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative MT8815B / MT8820B (The MT8820B is replaced by the MT8820C)
  • Status Discontinued by Manufacturer

The MT8820A covers the frequency range from 30 MHz to 2.7 GHz and is designed to perform Transmitter and Receiver tests on 3G W-CDMA UE terminals in accordance with 3GPP TS34.121 and GSM terminals for both R&D and manufacturing applications. With appropriate measurement software and hardware options installed, this single platform supports evaluation of all the main transmission/reception test items for W-CDMA terminals including HSDPA. Options also support EDGE/EGPRS and 1xEV-DO, as well measurements for two phones simultaneously.

3GPP call processing is also supported, allowing both functional tests and transceiver measurements to be made in a call processing state. In addition, the voice signal from the terminal can be echoed-back during conversation in order to perform a simple voice communications test. Audio codecs are also available for real-time communication with terminals.

Advanced DSP and parallel measurement technologies dramatically reduce wireless manufacturing and inspection test times. Furthermore, multiple measurements can be selected for batch measurement. A one-touch operation allows selected batch measurements to be executed repeatedly a designated number of times. Pass/fail evaluation of the main measurement items -- including transmission frequency, modulation accuracy, output power, adjacent channel power, occupied frequency bandwidth, and BER -- can be performed easily and quickly.

  • Frequency range 30 MHz to 2.7 GHz
  • Maximum input level: +35 dBm
  • VSWR
    • Main: ≤1.2 (<1.6 GHz), ≤1.25 (1.6 to 2.2 GHz), ≤1.3 (>2.2 GHz)
    • Auxiliary: ≤1.3 (at SG Output level: ≤–10 dBm)
  • Connector
    • Main: N type
    • Auxiliary: SMA type
    • Reference oscillator: BNC type
    • External reference input: BNC type
  • Reference oscillator
    • Frequency: 10 MHz
    • Level: TTL
    • Startup characteristics: ≤±5 x 10–8 (at 10 min after startup referenced to frequency 24 h after startup)
  • External reference input
    • Frequency: 10 MHz to 13 MHz
    • Level: ≥0 dBm
  • RF signal generator
    • Frequency range: 30 to 2700 MHz, setting resolution: 1 Hz
    • Output level range: -140 to -10 dBm (main), -130 to 0 dBm (auxiliary), resolution 0.1 dB
    • Non-harmonic spurious: ≤–50 dBc (at offset frequency: ≥100 kHz, except Uplink frequency – Downlink frequency + 4.1825 GHz), ≤–40 dBc [spurious of (4.8 GHz – Downlink frequency GHz) GHz at ≥2.1 GHz]
    • Harmonics: ≤–25 dBc 
  • Advanced DSP and parallel measurement technologies for fast test time
  • 3GPP call processing including Registration; Origination, and Termination
  • 12 Transmitter measurements items including Modulation analysis; Adjacent channel power ratio and Peak code domain error according to 3GPP TS34.121
  • Bit Error rate (BER) and Block Error rate (BLER) receiver measurements using 3GPP loopback method
  • "One-touch" Batch measurement operating mode with Pass/Fail evaluation
  • Multi-system W-CDMA / GSM capability
  • 1xEV-DO support including external packet data communications measurement capability and IP data communications mode
  • EDGE/EGPRS measurement software supporting MCS1-MCS4 (GMSK modulation) and MCS5-MCS9 (8PSK modulation) coding
  • HSDPA call processing and RF transmission/reception measurements for mobile terminals with UE category 1 to 6, 11, and 12
  • Parallel phone measurement to increase measurement speed, reduce production costs, and save manufacturing space
  • Display: Color 8.4" TFT LCD, 640 x 480 dots
  • GPIB: Control from external host with main unit as device (excluding some functions such as power-on)
  • Interface functions: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2

View Similar Listings
Hide Similar Listings

Send a Request

To: Hitech&Facility
Optional Fields
            
            
            

About Hitech&Facility

Send to a Friend

Recently Viewed Listing Pages

Recently Viewed Products